Set Department Names - IBM 4610 SureMark GR3 Programming Manual Supplement

5.1.6 22 - SET DEPARTMENT NAMES

This command is used to replace the default departament names.
5.1.6.1 Command Format
-----------------------------------------------------------------------
BYTE BIT CONTENT
0-1 1B66 - Cmd Prefix
2 22 - Set Department Name
3 Cmd. Extension
7-4 Reserved (always = ' 0 ' )
3-0 Departament Number
4-15 Department Name
-----------------------------------------------------------------------
Notes:
1. Department number range is from 1 to 10.
5.1.6.2 Set Department Names Rules
•
This command must be issued for 10 number of departments for fiscal vouchers.
•
The departament names are restored to their original default character string when RAM is cleared by
installation of the hardware J4/CE jumper.
Page 52 of 183 — IBM 4610 SureMark Fiscal Printer Turkey - Models GR3/GR5/GB3/GB5 Programmin
TYPE LENGTH
hex 2
hex 1
hex 1
(Note 1)
ASCII 12