Cd - Cash Drawer Management - IBM 4610 SureMark GR3 Programming Manual Supplement

5.9.4 CD - CASH DRAWER MANAGEMENT

ONLY VALID FOR 4610 USB
This command is used to open and read status of the chash drawer.
5.9.4.1 Command Format
-----------------------------------------------------------------------
BYTE BIT CONTENT
0-1 1B66 - Cmd Prefix
2 CD - Cash Drawer Management
3 Cmd. Extension
00 = Open Cash Drawer
01 = Get Cash Drawer Status
If Cmd. Extension = 00 specify:
4 Cash Drawer Number
5 Pulse Width ON Time
6 Pulse Width OFF Time
-----------------------------------------------------------------------
Notes:
1. Numbers allowed: 0 and 1.
2. The value given in this field must be multiplied by 2 in order to get the pulse width on/off in
miliseconds.
Range allowed: from x00 to xFF.
Response to the Cmd. Extension 01 will be formatted as follows:
-----------------------------------------------------------------------
BYTE BIT CONTENT
0-14 Fiscal Unit Status
15 Cash Drawer Status
00 = Open
01 = Close
-----------------------------------------------------------------------
Page 116 of 183 — IBM 4610 SureMark Fiscal Printer Turkey - Models GR3/GR5/GB3/GB5 Programmi
TYPE LENGTH
hex 2
hex 1
hex 1
hex 1 (Note 1)
hex 1 (Note 2)
hex 1 (Note 2)
TYPE LENGTH
hex 15
hex 1