5.10.5 DE - END APPLICATION-ORIGINATED REPORT
This command is used to end a application-originated report (non-fiscal report).
5.10.5.1 Command Format
-----------------------------------------------------------------------
BYTE BIT CONTENT
0-1
1B66 - command prefix
2
DE - End Application-Originated Report
3
Cmd. Extension
7-0 Reserved (always = ' 0 x00' )
-----------------------------------------------------------------------
5.10.5.2 End Application-Originated Report Calculations
If 'FOPENCR' = YES
•
Day_N_NFR = Day_N_NFR + 1
Day_N_NFCR = Day_N_NFCR + 1
If 'FOPENSJ' = YES
•
Day_N_NFR = Day_N_NFR + 1
Day_N_NFJL = Day_N_NFJL + 1
5.10.5.3 End Application-Originated Report Rules
There are not rules for this command.
TYPE
LENGTH
hex
2
hex
1
hex
1
Command Set Reference — Page 125 of 183