Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual page 68

ID50 Series Panel - Installation, Commissioning & Configuration Manual
5
6
5
997-263-000-11, Issue 11
January 2010
2 Press the ' /
2 8
Night Settings options until the Primary Delay Time
screen is displayed.
[Setup] Day mode activity = DISABLED
> : Change 1 : Disable
3 Press the ' ' button. The display then prompts you
6
for the new value:
[Setup] Primary Delay Time = 30 Seconds
Enter new value ____
4 Enter the required delay time using the numeric
buttons; (e.g. to set the delay time to the maximum
value of 300 seconds, first enter '3', then enter '0', '0').
[Setup] Primary Delay Time = 30 Seconds
Enter new value 300
5 Press the ' ' button to confirm and return to the
5
Setup menu screen.
6 Repeat steps 1 to 5 for the Extend Delay Time, using
the Extend Delay Time display and a maximum value
of 10 minutes.
64
' buttons to step through the Day/
: More < : Exit
: Confirm < : Cancel
: Confirm < : Cancel