Sony MZ-B100 Operating Instructions (primary manual) Operating Instructions Manual page 48

Symptom
The disc cannot
edit on other
component.
Momentary noise
is heard.
The group
function (group
mode/group skip
mode) does not
operate.
The display
window is not
normal.
The recorder
skips tracks when
you press ./
>.
48
-GB
Cause/Solution
• The component does not support LP2 stereo or LP4 stereo.
, Edit on other component that support LP2 stereo or LP4 stereo.
• Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.
• While using a disc that has no group information, an attempt was
made to turn the group mode on ("No Group" appears).
, Use a disc with a group information.
• The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power source,
reconnect it, and then press any of the operating buttons.
• The group skip mode is on.
, The group skip mode automatically turns off if no operation is
made for 5 seconds.