Sony MZ-B100 Operating Instructions (primary manual) Operating Instructions Manual page 35

Press/Turn Functions
./>
To change the letter to
the one before / next
one.
SPEED To move the cursor to
CONTROL the right (Press
slightly)
To enter the phrase
(Press 1.5 seconds or
more)
To select a letter
(Turn)
EASY To move the cursor to
SEARCH +/– the left or right.
DISPLAY To insert a blank space
to type in a new letter.
PLAY MODE To delete a letter and
move back all
following letters to the
left.
xSTOP Cancel labeling.
5
Repeat step 4 and enter all characters
of the label name.
6
Press EDIT/ENTER
The track or disc is labeled.
Labeling a track during
playback
1
To label a track, insert a disc and play
the track you want to label.
To label a group, insert a disc, turn the
group mode on, and play the group
you want to label (page 30).
2
Press EDIT/ENTER.
The recorder plays the selected track
repeatedly.
.
3
To label a track, press EDIT/ENTER
while " : Name" is flashing.
To label a group, press . or >
repeatedly until "
in the display, and then press EDIT/
ENTER.
The track or group is ready to be
labeled.
4
Follow steps 4 to 6 of "Labeling a
disc during stop".
Labeling a track or a disc
during recording
To label a group, you must first turn the
group mode on before the start of
recording (page 23).
1
While recording, press EDIT/
ENTER.
" : Name" flashes in the display.
2
To label a track, press EDIT/ENTER
while " : Name" is flashing.
To label a group, press . or >
repeatedly until "
in the display, then press EDIT/
ENTER.
To label a disc, press . or >
repeatedly until "
flashes in the display, then press
EDIT/ENTER.
The track, group, or disc is ready to
be labeled.
3
Follow steps 4 to 6 of "Labeling a
disc during stop".
To cancel labeling
Press xSTOP.
To relabel recordings
Follow the steps corresponding to the
labeling method until the track, group, or
disc is ready to be labeled. Enter a new
character over the one you want to
change, then press the EDIT/ENTER
button.
: Name" flashes
: Name" flashes
: Name"
35
-GB