To Release A Group Setting - Sony MZ-B100 Operating Instructions (primary manual) Operating Instructions Manual

2
Press . or > repeatedly until
" : Set" flashes in the display, and
then press EDIT/ENTER.
"001" flashes in the display.
STR:001
END:001
:
3
Press . or > repeatedly until
the number or name of the desired
first track flashes in the display, and
then press EDIT/ENTER.
This selects the first track of the new
group.
Even when the group mode is on,
track numbers appear according to
their order on the disc, not their order
within the group.
4
Press . or > repeatedly until
the number or name of the desired
last track flashes in the display, and
then press EDIT/ENTER.
This selects the last track of the new
group.
5
Follow steps 4 to 6 of "Labeling
recordings" (page 34) to label a
group.
z
You can also use the SPEED CONTROL dial to
select and then enter the menu. Turn the dial
(instead of ./>) to show the menu items
one by one and press the dial (instead of EDIT/
ENTER) to enter the selected menu.
Notes
• In step 3, the first track must either be the first
track of an existing group or a track that does
not belong to a group.
• When selecting the last track in step 4, make
sure the track comes after the one selected in
step 3. The last track must either be the last
track of an existing group or a track that does
not belong to a group.
To release a group
setting
./>
xSTOP
GROUP
1
Press GROUP for 2 seconds or more.
" " lights up in the display and the
group mode turns on.
2
Follow steps 1 and 2 of "Selecting
and playing groups (Group skip
mode)" (page 31) and check the
contents of the group you want to
release. Then press xSTOP.
3
Press EDIT/ENTER.
4
Press . or > repeatedly until
" : Release" flashes in the display,
and press EDIT/ENTER.
"Release?" appears and
"PushENTER" flashes in the display.
5
Press EDIT/ENTER.
The group setting of the selected
group is released.
z
You can also use the SPEED CONTROL dial to
select and then enter the menu. Turn the dial
(instead of ./>) to show the menu items
one by one and press the dial (instead of EDIT/
ENTER) to enter the selected menu.
EDIT/ENTER
37
-GB