Erasing A Track Mark - Sony MZ-B100 Operating Instructions (primary manual) Operating Instructions Manual

Note
Make sure to press the TRACK MARK button
for 2 seconds or more, if not, a regular track
mark will be added.
To locate special track marks
during playback
While pressing down VOR, momentarily
press .REVIEW/AMS or >CUE/
AMS.
The track number appears after the
special track mark indication ("TT").
002
00:40
:TT
Special track mark indication
Press .REVIEW/AMS repeatedly to
go to previous special track marks. Press
>CUE/AMS repeatedly to go to
succeeding special track marks.
To change a regular track
mark to a special track mark
After the completion of recording, add
"TT" at the beginning of the name of the
track you want to change.
To change a special track
mark to a regular track mark
After the completion of recording, erase
"TT" at the beginning of the track name
or change the name of the track.

Erasing a track mark

When you erase a regular track mark or a
special track mark, the track numbers will
change as follows.
Example
When combining track 2 and track 3
1 2
Erase a track mark
1 2
Track numbers decrease
XPAUSE
1
While playing the track with the track
mark you want to erase, press
XPAUSE to pause.
To erase the third track mark, play the
third track and press XPAUSE.
2
Find the track mark by pressing
.REVIEW/AMS slightly.
Find the beginning of the third track.
"00:00" appears in the display.
"MARK" appears in the display for 2
seconds.
3
Press TRACK MARK to erase the
mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
3 4
3
.REVIEW/AMS
TRACK MARK
33
-GB