Juniper G10 CMTS Getting Started page 2

•
•
Copyright © 2002, Juniper Networks, Inc. All rights reserved. Juniper Networks is registered in the U.S. Patent and Trademark Office and in other countries
•
as a trademark of Juniper Networks, Inc. Broadband Cable Processor, G10, Internet Processor, JUNOS, JUNOScript, M5, M10, M20, M40, M40e, M-series,
•
M160, ServiceGuard, T640, and T-series are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered
service marks are the property of their respective owners. All specifications are subject to change without notice.
•
•
Products made or sold by Juniper Networks (including the M5, M10, M20, M40, M40e, and M160 routers, T640 routing node, and the JUNOS software) or
•
components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos.
5,473,599, 5,905,725, and 5909,440.
•
•
Juniper Networks G10 CMTS Getting Started
•
Copyright © 2002, Juniper Networks, Inc.
•
All rights reserved. Printed in USA.
•
Writer: Jerry Isaac
•
Illustrations: Paul Gilman
•
Covers and template design: Edmonds Design
•
Revision History
•
17 June 2002—First Edition.
•
•
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or
otherwise revise this publication without notice.
•
•
The DOCSIS Module performs encryption that is subject to U.S. Customs and Export regulations. A DOCSIS Module shall not be exported, sold or transferred
•
to a country outside the USA and Canada without an appropriate export license from the U.S. Government. The specific Regulations governing exports of
•
encryption products are set forth in the Export Administration Regulations, 15 C.F.R. (Code of Federal Regulations), Parts 730-774.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ii