Table of Contents
Advertisement
Brief Instructions on Commissioning
3.7
Insert the interface module and the electronics modules
Start at the left by inserting the electronics modules. See also: Inserting and
Labeling the Power Supply, Interface Module, and Electronics Modules.
Make sure you install in the order shown below:
• Power supply PS
• Interface module IM 151-2
• 3x 4DI NAMUR
• 3x 2DO DC25V/25mA
3.8
Setting the PROFIBUS Address
On the IM 151-2 interface module, set PROFIBUS address 3. See also: Setting the
PROFIBUS Address.
Interface module
Figure 3-5 Setting PROFIBUS Address 3
3-8
ON
Example:
OFF
DP address=
64
32
16
8
4
2
+ 2
1
+ 1
_______
*
= 3
* Intended for future expansion.
Switch must be set to OFF.
ET 200iS Distributed I/O Station
A5E00087831-02
Advertisement
Table of Contents
