Date/Time - Advantek Networks AWR-11N-RT User Manual

All manuals and user guides at all-guides.com
make sure a secure syslog server is available. Default: Disable.
Remote Log Server Address:
Remote Log Server Port:
Log to Remote and Local:
Disable – Only remote log server can keep the system log file.

3.5.3 Date/Time

NTP (Network Time Protocol) is a protocol that allows local computers to
synchronize the clocks. When a NTP client initiates a time request exchange with the NTP
server, the client can adjust it local clock to exactly match the clock at the server's computer.
Accurate time information is critical for monitoring the device with system log.
The device will synchronize itself with an external NTP server automatically.
When one of the following conditions occurs:
Rebooting the device.
The Expires time having run out.
You will need to set the time zone corresponding to your location. The time can be
set manually or the device can connect to a NTP server to retrieve the time. You may also set
Daylight Saving dates and the system time will automatically adjust on those dates.
Date Time Set By:
Manual Time Setting: IF you choose this item, then go to the fields of Date
Value Setting & Time Value Setting for setting time.
NTP Time Server: If you choose this item, then go to the filed of NTP Server
address to assign the domain name for NTP Server.
Enter the IP Address of remote log server.
Enter the port number of remote log server. Default: 514.
Enable – Both local & remote sites will keep system log file.
65