Connect To Another Router - Advantek Networks AWR-11N-RT User Manual

All manuals and user guides at all-guides.com
If you decide to use IP address from Wireless Router, select "Obtain an IP
•
address automatically".
If you decide to use the IP address you are desired, select "Use the
•
following IP address". Make sure enter correct addresses in "IP
Address" and "Subnet Mask" fields.
You must set Wireless Router's IP address as "Default Gateway".
•
If the DNS Server fields are empty, select "Use the following DNS server
•
addresses" and enter the DNS address is provided by your ISP, then click
"OK".

2.2 Connect to another Router

If you are connecting the wireless 11n router to another router to use as a wireless access
point and/or switch, you will have to do the following before connecting the router to your
network: Disable UPnP
address on your network. The LAN ports on the router cannot accept a DHCP address from
your other router.
To connect to another router, please follow the steps below:
a) Plug the power adapter into the wireless 11n router. Connect one of your computers to the
router (LAN port) using RJ-45 Ethernet cable. Make sure your IP address, for example, your
computer original IP address is 192.168.10.48 and now your need to change computer IP as
Disable DHCP Change the LAN IP address to an available
18