Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Enable:
Enable/Disable the LAN packet filter. Default setting is Disable.
Source IP:
The IP address of the LAN computer that will be denied access to the Internet.
You can also add a range of IP addresses.
Destination Port:
The single port or port range that will be denied to access. If no port is
specified, all ports will be denied access.
Protocol:
This is the protocol type that will be used with the Port that will be blocked.
Block:
You can block the IP address of the LAN computer always or by schedule.
Day:
If Block set to "by Schedule", you need to determine which day(s) will be performed.
Time:
If Block set to "by Schedule", you need to determine which time will be performed
Action:
Insert a new LAN packet filter or update a specified LAN packet filter.
[MAC Packet Filter]
Use MAC Filters to deny computer within the local area network from accessing the Internet.
You can wither manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the unit.
Enable:
Enable/Disable the MAC packet filter. Default setting is Disable.
MAC Address:
The MAC address of the computer in the LAN (Local Area Network) to be
used in the MAC filter table. Enter the MAC address of LAN port, e.g. 00:00:27:88:81:18
Block:
You can block the MAC address of the LAN computer always or by schedule.
Day:
If Block set to "by Schedule", you need to determine which day(s) will be performed.
Time:
If Block set to "by Schedule", you need to determine which time will be performed
Action:
Insert a new MAC packet filter or update a specified MAC packet filter.
3.2.7 URL Filter
With security reason, the URL Filter provides the enterprise to manage and restrict
employee access to non-business or undesirable content on the Internet. URL Filter is a web
solution that blocks web-sites access according the URL Filter String no matter the URL string
is found full or partial matched with a keyword.
Click URL Filter on Network Settings, below screen will prompt for URL Filter setting.
Enable:
Enable/Disable the URL Filter. Default setting is Disable.
38
Advertisement
Table of Contents
