Table of Contents
Advertisement
All manuals and user guides at all-guides.com
[DHCP Server Setting]
DHCP Server:
To enable/disable DHCP server's dynamic IP address assignment. Default:
Enable.
Assigned DHCP IP Address:
Specify the starting/ending IP address of the IP address pool.
Default Start IP: 192.168.1.100.Default End IP: 192.168.1.250.
DNS IP Lease Time:
Specify the time duration for which the settings will be in effect. Default:
86400 seconds.
[DHCP Static MAP]
MAC:
Enter the MAC address of each DHCP client.
IP:
Assign an IP address for each DHCP client. The IP address should comply with the DHCP
address pool you specified. The DHCP address pool contains the range of the IP address that
will automatically be assigned to the clients on the network.
Description:
Enter a short description for this DHCP client.
Action:
Insert a new DHCP Static entry or update a specified entry.
[DHCP Client List]
DHCP client computers connected to the device will have their information displayed in the
DHCP Client List table. The table will show the Type, Host Name, IP Address, MAC Address,
Description, and Expired Time of the DHCP lease for each client computer.
3.2.4 Static Route
Static routes are special routes that the network administrator manually enters into
the router configuration. The route table allows the user to configure and define all the static
routes supported by the router. Click Static Route on Network Settings, below screen will
prompt for Static Route setting.
32
Advertisement
Table of Contents
