Advanced Setting - Advantek Networks AWR-11N-RT User Manual

All manuals and user guides at all-guides.com
WLAN: Enable/Disable the Wireless LAN feature. Default setting is Disable.
WLAN Mode: Choose a mode from the pull-down menu. Make sure that you have the
equipment you need. As you're looking for products in stores or on the Internet, you might
notice that you can choose equipment that supports five different wireless networking
technologies: 802.11b/g/n Mixed, 802.11b/g Mixed, 802.11b, 802.11g, and 802.11n
WLAN Frequency: Choose a frequency from the pull-down menu.
WLAN SSID: Specify the network name. Each Wireless LAN network uses a unique Network
Name to identify the network. This name is called the Service Set Identifier (SSID). When you
set up your wireless adapter, you specify the SSID. If you want to connect to an existing
network, you must use the make up your own name and use it on each computer. The name
can be up to 20 characters long and contain letters and numbers.
WLAN MAC: Specify the MAC address of your Wireless LAN. MAC Address is a unique
hardware number of this module.

3.3.2 Advanced Setting

These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. These settings should not be changed unless you know what effect the
changes will have on your AP router. Click Advanced Setting on Wireless Settings, below
screen will prompt for Advanced Setting.
44