Chrysler Conquest 1988 Service Manual page 1078

REAR SUSPENSION
- Lower Control Arm
INSPECTION
N17HBAA
* Check the lower control arm toy detormation and damage.
r Check the bushrngs tor damage and wear.
a Check the bolts tor bend.
SERVICE POINTS OF INSTALLATION
N17HDAD
4. INSTALLATION OF LOWER CONTROL ARM
(I) Apply specified grease to the concave part of the shaft
connecting the lower~control arm to the axle housing. ~-
Specified grease: MOPAR Multi-Mileage Lubricant
Part No. 2525035 or equivalent
Caution
Apply a thin coat of specified grease, taking care
that it does not adhere to the bushing.
(2) Insert the shaft with the mark on its head facing
downward.
(3) When installing the lower control arm to the crossmem- -1
ber, align the mark q the crossmember_with the _
reference 1in.e on theplate.
(4) Measure the wheel alignment.
3. INSTALLATION OF STABILIZER BAR CONNECTION
Refer to P.l7-7-l.