ECUs
Remove the mats (
Remove the pedal mat.
Refit the mats (
E4.05).
E4.05).
Undo the screws indicated.
Remove the reinforcement plate (1).
Move the reinforcement plate aside without
disconnecting the power steering ECU from the
system.
Disconnect the connector (2).
Undo the nuts indicated.
Remove the tyre pressure monitoring system ECU
(A) and replace.
Fit the tyre pressure monitoring system ECU (A) in
the relative seat.
Tighten the nuts indicated.
Tightening torque
Nut
Connect the connector (2).
Fit the reinforcement plate (1).
Tighten the screws indicated.
Tightening torque
Screw
Page 12 of 24
Nm
Class
6 Nm
B
Nm
Class
5 Nm
B