Table of Contents
Advertisement
ECUs
Refit the rear left hand wheelhouse.
Reconnect the battery (
Perform the engine ECU Cycle with the DEIS tester.
Replacing ELDOR ionizing ECU
Tightening torque
Fastening bracket and ELDOR ionizing ECU to
chassis
NEVER start the engine with the ELDOR ECUs disconnected: this would irreparably damage the coils
and the Motronic ECUs.
The ELDOR ionizing ECU is located behind the rear right hand wheelhouse.
Disconnect the battery (
Remove the rear wheelhouses (
Remove the rear right hand wheelhouse.
Reconnect the battery (
Refit the rear wheelhouses (
Removing adaptive headlight ECU
The adaptive headlight ECU is located under the right hand headlight.
F2.01).
Screw
F2.01).
E3.05).
F2.01).
E3.05).
Detach the connectors (2) from the ELDOR ionizing
ECU (A).
Undo the indicated screws, and retrieve cover (1), if
any, and ELDOR ionizing ECU (A).
Pay ATTENTION to the code indicated on the
ECU to avoid installing the previous version,
which would damage the coils and the
Motronic ECUs.
Position ELDOR ionizing ECU (A) into its seat onto
frame, and cover (1), if any, onto it, and secure
everything tightening the indicated screws.
Tightening torque
Screw
Connect the connectors (2) to the ELDOR ionizing
ECU (A).
Page 5 of 24
Nm
Class
9 Nm
B
Nm
Class
9 Nm
B
Advertisement
Table of Contents
