5. System Maintenance
Accessing Service Menus
There are different test menus that can be accessed during power-on reset (POR) to identify problems
with the machine.
Configuration Menu
Diagnostics Mode
To run the diagnostic tests described in this chapter, the machine must be in Diagnostic Mode.
• If you have installed a controller board, engine board, or operator panel as part of a
troubleshooting procedure, start the machine into diagnostic mode to test the repair.
The Configuration Menu group contains a set of menus, settings, and
operations which are infrequently required by a user. Generally, the options
made available in this menu group are used to configure a machine for
operation.
The Diagnostics Mode group contains the settings and operations used while
manufacturing and servicing the machine.
5
141