Operator Panel Service Check - Ricoh LI-MF1 M126 Field Service Manual

Step Questions / actions
Verify that the ISP wireless card cable
and any other ISP cables are properly
18
seated in their connectors.
Are the cables connected correctly?
Properly reseat the ISP cables.
19
Did this fix the problem?
Perform the option card service check (
p.251 "Option Card Service Check").
20
Was there another faulty ISP option?
Replace the ISP wireless card? (
"Installing an Internal Solutions Port
21
(ISP)")
Did this fix the problem?

Operator Panel Service Check

Inspect the operator panel cable for damage. Make sure the cable is plugged in securely. Run POST,
and check each light for proper operation (
Yes
Go to step 20.
Problem resolved.
Replace the faulty ISP
option (p.128
"Installing an Internal
Solutions Port (ISP)").
p.128
Problem resolved.
p.192 "Power–On Self Test (POST) Sequence").
Service Checks
No
Go to step 19.
Go to step 20.
Go to step 21.
Replace the controller
board ( p.44
"Controller Board
Removal").
6
245