Omron 3G3RX2-A2 Series Instruction Manual page 73

■Output terminals
(Wiring example)
Open
collector
Output Digital
terminal output
Relay
Terminal Terminal
symbol name
15, 14 Output You can select terminal functions
terminal using the parameter settings corre-
13, 12
sponding to each terminal.
11
These terminals can be used both in
sink logic or source logic.
CM2 Common Common terminals for output termi-
for output nals 11-15
terminal
16A 1a relay A relay for contact A output.
terminal
16C
AL0 1c relay A relay for contact C output.
terminal
AL1
AL2
Description Electrical characteristics
Open collector output
• Between each terminal and CM2
• Voltage drop at ON: 4V or below
• Maximum allowable voltage: 27V
• Maximum allowable current:
50mA
Maximum capacity of contact
• AC250V, 2A (resistance)
• AC250V, 1A (induction)
Minimum capacity of contact
• DC1V, 1mA
Maximum capacity of contact
AL1/AL0:
• AC250V, 2A (resistance)
• AC250V, 0.2A (induction)
AL2/AL0:
• AC250V, 1A (resistance)
• AC250V, 0.2A (induction)
Minimum capacity of contact (com-
mon)
• AC100V, 10mA
• DC5V, 100mA
Control circuit
29