Connecting An Analog Vcr To The; Signal Conversion Function - Sony HVR-Z1N Operating Instructions Manual

Connecting an analog
VCR to the computer
via your camcorder

– Signal conversion function

Connect an analog video device to your
camcorder using the A/V connecting cable
Connecting a computer
Refer to the manual supplied with the
application software for the system
requirements of the computer.
HDV/DV jack
Signal flow
b Note
• Select the (OTHERS) menu, [DISP OUTPUT],
then [LCD PANEL] (the default setting) (p. 80).
cable connected, the computer may hang up or may
104
Dubbing/Editing
(supplied), and a digital device such as a
computer to your camcorder using an i.LINK
cable (optional). Your camcorder converts
the analog video signal from the VCR to a
digital signal and transmits it to the computer
to be dubbed.
To use the signal conversion function,
application software to import video signals
must be installed on the computer.
When you have an S video jack
on your VCR
S video cable
(optional)
AUDIO/VIDEO jack
A/V connecting
cable (supplied)
i.LINK cable (optional)
• Before connecting the i.LINK cable, select the
(IN/OUT REC) menu, [VCR HDV/DV], then [DV]
(p. 70). If you do this operation with the i.LINK
not recognize this camcorder.
Yellow
White
Red