Fading In And Out Of A Scene - Fader; Recording An Index Signal At The Beginning Of Recording - Sony HVR-Z1N Operating Instructions Manual

Fading in and out of a scene
– FADER
You can add the following effects to
currently recording pictures.
Assign the FADER function to one of the
ASSIGN buttons in advance. See page 86 for
details on how to assign a function.
ASSIGN 1 – 6
[BLACK FADER]
[WHITE FADER]
1
Press the ASSIGN button assigned to
the FADER function in the standby
mode (to fade in) or during recording
(to fade out).
Each time you press the button, the
indicator changes as follows:
[BLACK FADER] t [WHITE FADER]
t no display
44
Recording
REC START/STOP
2
Press REC START/STOP.
The FADER indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
Press the ASSIGN button assigned to the
function repeatedly until the
FADER
indicators disappear.
b Note
• You cannot use the FADER function together with
[FRAME REC] (Frame recording).
Recording an index signal at the
beginning of recording
If you make an index for a scene, you can
easily search for the scene later (p. 56).
The index function will make it easier to
check the transition of recording or edit your
pictures using index signals.
Assign the index function to one of the
ASSIGN buttons in advance. See page 86 to
assign a function.
ASSIGN 1 – 6
FADER
REC START/STOP