Sony HVR-Z1N Operating Instructions Manual page 23
Sony operating instructions digita hd video camera hvr-z1u
Hide thumbs
Also See for HVR-Z1N:
- Service manual (482 pages) ,
- Operating instruction (68 pages) ,
- Brochure & specs (13 pages)
Table of Contents
Advertisement
To record a wider range of view
Press the W side of the power zoom lever.
The subject appears farther away (Wide
angle).
To record a closer view
Press the T side of the power zoom lever.
The subject appears closer (Telephoto).
z Tip
• You can display the zoomed position with a number
or a bar display. Select [BAR] or [NUMBER] in
[ZOOM DISPLAY] on the
(OTHERS) menu
(p. 80). The zoom position is displayed with a bar
display in the default setting.
Using the handle zoom
You can adjust the zoom speed with the handle
zoom switch when using the handle zoom lever.
Handle zoom lever
Handle zoom switch
Zoom ring
1
Set the ZOOM switch to LEVER/
REMOTE.
2
Set the handle zoom switch to H (high) or
L (low).
You can set the zoom speed of H or L of the
handle zoom lever in [HANDLE ZOOM]
on the
(CAMERA SET) menu. In the
default setting, [H] is set to 6, and [L] is set
to 3 (p. 62).
3
Press the handle zoom lever to zoom in or
out.
b Note
• You cannot adjust the zoom speed by pressing the
handle zoom lever. Change the zoom speed by
setting [HANDLE ZOOM] (p. 62).
• You cannot use the handle zoom lever when the
handle zoom switch is set to OFF.
• You cannot change the zoom speed of the power
zoom lever on the camera itself by switching the
handle zoom switch.
Using the zoom ring
You can zoom at the desired speed. Fine
adjustment is also possible.
1
Set the ZOOM switch to RING.
2
Rotate the zoom ring to zoom.
b Note
• Rotate the zoom ring at an appropriate speed.
Zooming may not be able to catch up the rotating
speed of the ring if it is rotated too fast.
• When you zoom using the Remote Commander, set
the ZOOM switch to LEVER/REMOTE.
• Zoomed position and picture angle change when the
ZOOM switch is switched from LEVER/REMOTE
to RING.
• If you rotate the zoom ring fast, motor noise will
become louder as the zoom motor rotates at high
speeds. If the motor noise is so loud that can be
recorded, use the zoom lever or the Remote
Commander.
Page 23
Recording
Hide quick links:
Advertisement
Table of Contents
