Various Playback Functions; Searching For The Last Scene Of The Most Recent Recording - End Search; Displaying The Screen Indicators - Sony HVR-Z1N Operating Instructions Manual

Various playback
functions
You can locate the end of the last recording,
or display the date of recording and camera
settings data.
Searching for the last scene of the
most recent recording
– END SEARCH
This function is handy when you have played
back the tape, for example, but want to start
recording right after the most recently
recorded scene. The END SEARCH function
will not work once you eject the cassette after
you have recorded on the tape.
1
Set the POWER switch to VCR.
2
Press END SEARCH (VCR).
The last scene of the most recent recording
is played back for about 5 seconds.
To cancel the operation
Press END SEARCH (VCR).
50
Playback
b Note
• The END SEARCH function will not work correctly
when there is a blank section between recorded
sections on the tape.

Displaying the screen indicators

You can display the time code and other
information together with the pictures on the
screen.
Press DISPLAY/BATT INFO.
The indicator switches as follows as you press
the button:
(no display) t (display)
When the POWER switch is set to CAMERA,
the indicator switches as follows:
(simple display) t (no display) t (detailed
display)
Simple display
STBY
F1.8 9dB
Detailed display
120 STBY
min
HDV1080
i
F1.8 9dB
z Tip
• You can display the screen indicators during
playback on a TV. Select the
[DISP OUTPUT], then [V-OUT/PANEL] (p. 80).
However, only playback mode indicators and tape
counter appear when playing back a tape recorded in
the HDV format, and [COMPONENT] on the
(IN/OUT REC) menu is set to [1080i/480i]*.
* When [50i/60i SEL] is set to 60i. In case of 50i, this
item is [1080i/576i].
100
00:00:00:00
CH1
CH2
100
(OTHERS) menu,