Connecting An Analog Vcr To The Computer Via Your Camcorder - Digital Convert Function - Sony Computer Applications Guide Application Manual

Connecting an analog
VCR to the computer
via your camcorder
— Digital convert function
: Signal flow
Notes
b
• Some models are not compatible for this operation.
Regarding supported models, check to see if there is
a listing for the Digital convert function in the index
of the Camera Operations Guide.
• The supplied A/V cable varies depending on the
model. Refer to the separate Camera Operations
Guide supplied with your camcorder with the
operations guide of the analog video unit
You can convert an analog signal output from
an analog device such as a VCR to a digital
signal and transfer it to a digital device, such as
a computer, via your camcorder.
Software that can capture video signals must be
installed on the computer.
DV Interface
to i.LINK (IEEE1394)
connector
A/V connecting cable
(supplied)
A/V (audio/video)
jack
i.LINK cable (optional)
(White)
(Red)
AUDIO/VIDEO
jacks
VCR (analog)
Before operation
Set [DISPLAY] in the menu settings to [LCD
PANEL] (the default setting).
1
Turn on the analog video unit.
2
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
Use the supplied AC Adaptor as the power
source.
The name of the power switch on the
camcorder varies depending on the model.
3
Set [A/VtDV OUT] in the menu
settings of your camcorder to on.
(Yellow)
S video
plug (Black)
,continued
33
Other functions