Input1 Level; Input1 Trim; Input1 Wind; Input2 Level - Sony HVR-Z1N Operating Instructions Manual

INPUT1 LEVEL

Select the input signal from the INPUT1 connector, either from a microphone or
an audio device.
GMIC
LINE

INPUT1 TRIM

You can select the level of input signal from the INPUT1 connector. This setting
is effective only when [INPUT1 LEVEL] is set to [MIC].
-18 dB, -12 dB, -6 dB, 0 dB, +6 dB, +12 dB are available. It is set to 0 dB in the
default setting.

INPUT1 WIND

This setting is effective only when [INPUT1 LEVEL] is set to [MIC].
GOFF
ON

INPUT2 LEVEL

Select the input signal from the INPUT2 connector, either from a microphone or
an audio device.
GMIC
LINE

INPUT2 TRIM

You can select the level of input signal from the INPUT2 connector. This setting
is effective only when [INPUT2 LEVEL] is set to [MIC].
-18 dB, -12 dB, -6 dB, 0 dB, +6 dB, +12 dB are available. It is set to 0 dB in the
default setting.

INPUT2 WIND

This setting is effective only when [INPUT2 LEVEL] is set to [MIC].
GOFF
ON
Select to input an audio signal from a microphone connected to the
INPUT1 connector.
Select to input an audio signal from an audio device connected to the
INPUT1 connector.
Select when you want to record the sound from the INPUT1 connector
as it is, without reducing the noise caused by wind.
Select to reduce the noise caused by wind.
check display.
Select to input an audio signal from a microphone connected to the
INPUT2 connector.
Select to input an audio signal from an audio device connected to the
INPUT2 connector.
Select when you want to record the sound from the INPUT2 connector
as it is without reducing the noise caused by wind.
Select to reduce the noise caused by wind.
check display.
appears on the status check display.
appears on the status check display.
appears on the status
appears on the status check display.
appears on the status check display.
appears on the status
Using the Menu
67