Ricoh AP-P2 G188 Field Service Manual page 53

1000-Sheet Booklet Finisher (B793)
5. Install the ground plate [E] on the finisher ( x 2; M3 x 8).
2
6. Attach the rear joint bracket [F] ( x 2, M4 x 14).
7. Attach the front joint bracket [G] and the holder bracket [H] ( x 2; M4 x 14).
• The holder bracket [H] must be placed outside the front joint bracket [G]. The holder bracket is
provided with the bridge unit (D386).
8. Pull the lock lever [I] (Long knob screw x 1).
9. Slowly push the finisher to the left side of the machine, keeping its front door open until the brackets
[J] [K] go into their slots.
10. Push the lock lever [I], and then secure it (Long knob screw x 1).
51