Ricoh AP-P2 G188 Field Service Manual page 509

005 Sep DC: Plain: 1st S
006 Separation DC: Plain: 2nd S
007 Separation DC: TH: 1st Side
[SP3: LE: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2872
paper leading edge between the erase margin area and the image area.
Thick 1: 154 mm/sec, 1200: 77 mm/sec
001 PTR: Plain: 1st
002 PTR: Plain: 2nd
003 PTR: Thick 1: 1st
005 Sep DC: Plain: 1st
006 Sep DC: Plain: 2nd
007 Separation DC: 1200: 1st Page
[Special 3: TEdge Cor] Special 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2852 and SP2857 are multiplied by these SP values.
2873
Thick 1: 154 mm/sec, 1200: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2874.
001 PTR: Plain: 1st
002 PTR: Plain: 2nd
003 PTR: Thick 1: 1st
005 Sep DC: TH 1: 1st Side
006 Sep DC: TH 1: 2nd Side
007 Sep DC: Plain: 1st Side
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
Engine Service Mode
8
251