Sony DCR-TRV145E Operating Instructions Manual page 269

Changing the menu settings
Icon/item Mode
VCR SET
PLAYER SET
z ON PAL TV
NTSC PB
PB MODE* 6) z AUTO
After five minutes of removing the power source
The HiFi SOUND* 2) , EDIT*
Notes on AUDIO MIX*
•You can adjust the balance only for tapes recorded in the Digital8
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Note on PB MODE* 6)
The mode will return to the default setting when:
– you remove the power source.
– you turn the POWER switch.
1)
* Modes on the POWER switch vary depending on models (p. 26).
* 2)
3)
*
* 4)
5)
* When you play back tapes recorded in the Hi8
* 6)
Meaning
To playback a tape recorded on your camcorder on a
PAL system TV.
NTSC 4.43
To playback a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode.
To automatically select the system (Hi8
standard 8 mm
record on the tape, and play back the tape.
/
To play back a tape that was recorded in the
Hi8
camcorder does not automatically distinguish the
recording system.
3) and AUDIO MIX*
2)
or Digital8 ) that was used to
/standard 8 mm system when your
2) items are returned to their default settings.
/standard 8 mm
POWER
switch*
VCR/
PLAYER
/ VCR
system.
system only.
1)
269