Table of Contents
Advertisement
Preventing accidental
erasure
– Image protection
To prevent accidental erasure of important
images, you can protect selected images.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY. Make
sure that the LOCK switch is set to the right
(unlock) position.
(2) Press INDEX to display the index.
(3) Press - MARK. The screen to protect the
image appears.
(4) Press the image you want to protect. The
"-" appears on the protected image.
2
INDEX
3,4
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image
protection in step 4 again. The "-" disappears.
Note
Formatting erases all information on the
"Memory Stick," including the protected image
data. Check the contents of the "Memory Stick"
before formatting.
If the write-protect switch on the "Memory
Stick" is set to LOCK
You cannot carry out image protection.
-MARK
1
-MARK
4
T
(1)
(2)
(3)
(4)
MARK
DEL
EXIT
2
3
5
6
t
T
1 / 40
-
-
-
RET.
EXIT
-MARK
1
2
3
-
4
5
6
t
2 / 40
207
Hide quick links:
Advertisement
Table of Contents
