Sony Handycam DCR-PC101E Operating Instructions Manual page 115

Dubbing only desired scenes
– Digital program editing (on tapes)
(1) Setting the IR SETUP code
1 Set the POWER switch to VCR on your
camcorder.
2 Turn the power of the connected VCR on,
then set the input selector to LINE.
When you connect a video camera recorder,
set its power switch to VCR/VTR.
3 Press FN to display PAGE1.
4 Press MENU, then select VIDEO EDIT in
then press EXEC (p. 253).
5 Press r/R to select TAPE, then press EXEC.
6 Press EDIT SET.
7 Press r/R to select CONTROL, then press
EXEC.
8 Press r/R to select IR, then press EXEC.
9 Press r/R to select IR SETUP, then press
EXEC.
0 Press r/R to select the IR SETUP code of your
VCR, then press EXEC. Check the code in
"About the IR SETUP code" (p. 117).
(1)
1
2
,
3
4
r R
5
6
r R
7
r R
8
r R
9
r R
0
115