Preventing Accidental Erasure - Image Protection - Sony DVCAM DSR-PDX10 Service Manual

Preventing accidental erasure
– Image protection
You can protect selected images to prevent accidental erasure of important images.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the further side (unlock position).
(2) Press INDEX on your camcorder to display the index.
(3) Press - MARK, then press the image you want to protect. A "-" appears
on the protected image.
2
INDEX
3
-MARK
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 3 again. The "-"
disappears.
Note
Formatting erases all information on the "Memory Stick," including the protected
image data. Before formatting a "Memory Stick," check its contents.
If the write-protect switch on the "Memory Stick" is set to LOCK
You cannot protect images.
MARK DEL EXIT
-MARK
1 2 3
4 5 6
T t
1 / 40
RET. EXIT
-MARK
1 2 3
-
4 5 6
T t
2 / 40
183