Audio Dubbing - Sony Handycam DCR-PC101E Operating Instructions Manual

Audio dubbing

You can record additional audio to the original
sound on a tape by connecting audio equipment
or a microphone. If you connect the audio
equipment, you can add sound to your tape
already recorded in the 12-bit mode by
specifying starting and ending points. The
original sound will not be erased.
Select one of the following connections to add
additional audio.
Connecting the microphone
with the MIC jack
You can check the recorded picture and sound by
connecting the A/V jack to a TV.
The recorded sound is not output from a speaker.
Check the sound by using the headphones or TV.
134
Microphone (optional)/
: Signal flow/
MIC
(PLUG IN
POWER)