Sony Handycam DCR-PC101E Operating Instructions Manual page 146

Labelling a cassette
To return to FN
Press EXIT.
To erase the label you have made
Select C in step 5, then press SET.
To change the label you have made
Insert the cassette to change the label, and
operate in the same way to make a new label.
If you set the write-protect tab to lock
You cannot label the cassette. Slide the write-
protect tab to release the write protection.
If the tape has too many index signals
You may not be able to label a cassette because
the memory is full. In this case, delete data you
do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also
appear.
When the "-----" indicator has fewer than
10 spaces
The cassette memory is full.
The "-----" indicates the number of characters
you can select for the label.
To erase the title
Press C. The last character is erased.
To enter a space
Press c.
To enter the same character on the same
button in succession
Press c to move the cursor to the next position,
and enter the character.
146
C
C
c
c