Sony Handycam DCR-PC101E Operating Instructions Manual page 226

Connecting to your computer with
USB port – For Windows users
Viewing images recorded on
"Memory Stick"s on your computer
Before operation
Set USBCONNECT to NORMAL in the menu
settings. (The default setting is set to NORMAL.)
(1) Insert a "Memory Stick" into your camcorder.
(2) Connect the AC power adaptor to your
camcorder and set the POWER switch to
MEMORY.
(3) Connect the
with the USB port on your computer using the
supplied USB cable.
USB MODE appears on the LCD screen of
your camcorder. Your computer recognises
the camcorder, and the Add Hardware
Wizard starts.
(4) Follow the on-screen messages so that Add
Hardware Wizard recognises that the USB
drivers have been installed. Add Hardware
Wizard starts two times because two different
USB drivers are installed. Be sure to allow
each installation to complete without
interrupting them.
You cannot install the USB driver if a
"Memory Stick" is not in your camcorder.
Be sure to insert a "Memory Stick" into your
camcorder before installing the USB driver.
226
(USB) jack on your camcorder
(USB)
Push into the end/
(1)
(2)
(3)
USB cable (supplied)/
(4)
USB port/