Table of Contents
Advertisement
Recording a picture
Remaining battery time indicator during
recording
The remaining battery time indicator roughly
indicates the continuous recording time. The
indicator may not be correct, depending on the
conditions in which you are recording. When
you close the LCD panel and open it again, it
takes about one minute for the correct remaining
battery time in minutes to be displayed.
Time code
The time code indicates "0:00:00" (hours :
minutes : seconds) in recording and "0:00:00:00"
(hours : minutes : seconds : frames) in playback.
You cannot rewrite only the time code.
Remaining tape indicator
The indicator may not be displayed accurately
depending on the tape.
Recording data
The recording data (date/time or various settings
when recorded) are not displayed during
recording. However, they are recorded
automatically on the tape. To display the
recording data, press DATA CODE during
playback. You can also use the Remote
Commander for this operation (p. 54).
43
Hide quick links:
Advertisement
Table of Contents
