Sony Handycam DCR-PC101E Operating Instructions Manual page 250

Changing the menu settings
Icon/item
MEMORY SET
SLIDE SHOW
PHOTO SAVE
FILE NO.
DELETE ALL
FORMAT
PRINT SET
9PIC PRINT
DATE/TIME
Notes on formatting
•Do not do any of the following while FORMATTING is displayed:
– Change the POWER switch position to others
– Operate buttons
– Eject the "Memory Stick"
•The "Memory Stick" supplied with your camcorder has been formatted at factory. Formatting with
your camcorder is not required.
•You cannot format the "Memory Stick" if the write-protect switch on the "Memory Stick" is set to
LOCK.
•Format the "Memory Stick" if "
•Formatting erases protected image data on the "Memory Stick."
Note on PRINT SET
9PIC PRINT and DATE/TIME are displayed only when an external printer (optional) is connected to
the intelligent accessory shoe.
250
Mode Meaning
—— To play back images in a continuous loop (p. 205)
—— To copy still images on a tape onto a "Memory
Stick"(p. 192)
z SERIES To assign numbers to file in sequence even if the
"Memory Stick" is changed
RESET To reset the file numbering each time the "Memory
Stick" is changed
—— To delete all the unprotected images (p. 210)
z RETURN To cancel formatting
OK To format an inserted "Memory Stick."
Formatting erases all information on the "Memory
Stick."
Check the contents of the "Memory Stick" before
formatting.
1. Select FORMAT with r/R, then press EXEC.
2. Press r/R to select OK, then press EXEC.
3. After EXECUTE appears, press EXEC.
FORMATTING flashes during formatting.
COMPLETE appears when formatting is finished.
z RETURN To stop 9PICS print
SAME To execute SAME PICS print (p. 213)
MULTI To execute MULTI PICS print
MARKED To print images with print mark arranging them in
order of recording
z OFF To make prints without the recording date and time
DATE To make prints with the recording date (p. 214)
DAY&TIME To make prints with the recording date and time
FORMAT ERROR" appears.
POWER
switch
MEMORY
VCR
VCR
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY