Sony Handycam DCR-PC101E Operating Instructions Manual page 68

Adjusting the white balance
manually
If the picture is being taken in a studio lit by
TV lighting
We recommend that you record in the
n INDOOR mode.
When you record under fluorescent lighting
Use the AUTO or HOLD mode.
Your camcorder may not adjust the white
balance correctly in the n INDOOR mode.
In the automatic white balance mode
Point your camcorder at the white subject for
about 10 seconds after setting the POWER switch
to CAMERA to get better adjustment when:
– You detach the battery for replacement.
– You bring your camcorder from indoors to
outdoors holding the exposure, or vice versa.
In HOLD
Set the white balance to AUTO and reset to
HOLD after few seconds when:
– You change the PROGRAM AE mode.
– You bring your camcorder from indoors to
outdoors, or vice versa.
68
n
n