How To Set The Redundancy Of The Route Control Servers - Siemens SIMATIC PCS 7 Function Manual

Advantages of fault-tolerant components
4.7 SIMATIC Route Control stations
4. Select the connection path through which the Route Control server pair is connected in the
5. Click "OK".
4.7.6

How to set the redundancy of the Route Control servers

Introduction
You only have to configure the PC stations in the SIMATIC Manager for redundant Route
Control servers.
In the object properties of the PC station, the computer name must be configured or "Computer
name identical to PC station name" the check box must be activated.
Additional information
● Section "How to configure a Route Control server and its redundant Route Control partner
4.7.7 How to download the target systems for Route Control
Introduction
For Route Control plants with redundant Route Control servers, you should always download
the Route Control configuration to the Route Control server and the Route Control clients.
Additional information
● You can find information about downloading the Route Control server in the manual
● You can find information about downloading the configuration to the Route Control client
166
drop-down list.
– For connection via RJ45 cable:
In the "Network adapter" dropdown list, select the network adapter to which you want
to attach the network cable for the redundant connection between the two PC stations
of a server pair.
– For a serial connection:
In the "Serial port" dropdown list, select the port to which you want to attach the null-
modem cable for the redundant connection between the two PC stations of a server
pair: "COM1" or "COM2"
server (Page 157)"
Control System PCS 7; SIMATIC Route Control .
Process Control System PCS 7; SIMATIC Route Control .
in the manual
Fault-tolerant Process Control Systems (V8.0)
Function Manual, 03/2012, A5E02779471-02
Process