How To Set The Redundancy Monitoring Of Batch Servers - Siemens SIMATIC PCS 7 Function Manual

Result
The following figure shows the SIMATIC PC station with BATCH application client configured
in HW Config:
Additional information
● Manual
4.6.4

How to set the redundancy monitoring of BATCH servers

Introduction
A local Ethernet network needs to be built in PCS 7 for redundancy monitoring of redundant
BATCH servers.
Fault-tolerant Process Control Systems (V8.0)
Function Manual, 03/2012, A5E02779471-02
Process Control System PCS 7; SIMATIC BATCH
Advantages of fault-tolerant components
4.6 SIMATIC BATCH Stations
153