How To Configure The Redundant Profibus Pa - Siemens SIMATIC PCS 7 Function Manual

3. Select the "Graphic View" tab.
4. Using drag-and-drop, connect the connections of the CPU and the interface modules (green
Additional information
● Online help on
4.3.6

How to configure the redundant PROFIBUS PA

Introduction
The following is a description of how to configure a redundant PROFIBUS PA that is connected
to a redundant PROFIBUS DP.
You can find configuration variants in the section "Fault-tolerant PROFIBUS PA (Page 68)".
Fault-tolerant Process Control Systems (V8.0)
Function Manual, 03/2012, A5E02779471-02
Note:
You can move the objects displayed. You can select the section displayed via the thumbnail
view. Position the objects in accordance with the cable sequence in the system.
rectangle) in accordance with the cable sequence in the system.
You can make additional system-specific settings in the "Table View" tab. For additional
information, refer to the Online Help of the dialog box.
STEP 7
Advantages of fault-tolerant components
4.3 Communication connections
107