Alcatel Temporis IP150 Administration And Provisioning Manual page 82

2. With Mode selected, press SELECT. The Mode menu appears.
 
3. Press to select the network mode for your network type, and then press Save
or
DHCP (IPv4) or Auto (IPv6) is enabled by default, which means the set will get its IP address
from the network. When DHCP and Auto are disabled, you must enter a static IP address for
your phone
NOTE: You must be familiar with TCP/IP principles and protocols to configure static IP
To set static IP for your phone:
1. From the Mode menu, press
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
2. On the Set static IP menu, enter the static IP address. Use the dial pad and the
Add dot soft key to enter characters. Press
3. Press  and enter the Subnet Mask. Use the dial pad and the
enter characters. Press  or  to advance to the next character

4. Press and enter the Gateway. Use the dial pad and the
characters. Press

5. Press and enter the IP address for the primary DNS server. Use the dial pad and the
soft key to enter characters. Press
Add dot
Business IP Range Administration and Provisioning Guide
Mode
IP type: DHCP
Cancel
settings.
 
or
Set static IP
IP:
Subnet Mask:
Gateway:
DNS 1:
DNS 2:
Cancel Backspc Add dot
 
to advance to the next character.
or
Save
to select Static IP, and then press SELECT.
 
to advance to the next character.
or
Save
 
to advance to the next character
or
Add dott softkey to
Add dot soft key to enter
ed 2.2 82/247