To use the Network setting menu:
1. From the Admin settings menu, press or to highlight Network setting, then press
ENTER.
The Network setting menu appears.
Network setting
1.IPv4
2.IPv6
3.VLAN ID
Press
or
to highlight the desired option, and then press SELECT:
2.
To set the network mode:
1.
From the Network setting menu, press
or IPv6), and then press SELECT.
The selected network type screen appears (IPv4 menu shown below).
IPv4
1.Mode
2.Set Static IP
3.Set Static DNS
4.Set PPPoE
Business IP Range Administration and Provisioning Guide
Back
IPv4
Mode (DHCP, Static IP, PPPoE, Disabled)
Set static IP
Set static DNS
Set PPPoE (Point-to-Point Protocol over Ethernet)
IPv6
Mode (Disabled, Auto, Static IP)
Set static IP
Set static DNS
VLAN ID
Back
Select
or
to highlight your network type (IPv4
Select
ed 2.2
81/247