Alcatel Temporis IP150 Administration And Provisioning Manual page 66
Home & business phones. business ip range
Hide thumbs
Also See for Temporis IP150:
- Manual (106 pages) ,
- Quick start manual (2 pages) ,
- Administration and provisioning manual (175 pages)
Table of Contents
Advertisement
To set the network mode:
1.
From the Network setting menu, press
or IPv6), and then press SELECT.
The selected network type screen appears (IPv4 menu shown below).
IPv4
1.Mode
2.Set Static IP
3.Set Static DNS
4.Set PPPoE
2.
With Mode selected, press SELECT. The Mode menu appears
Mode
IP type:
3. Press
to select the network mode for your network type, and then press Save
or
DHCP (IPv4) or Auto (IPv6) is enabled by default, which means the set will get its IP address
from the network. When DHCP and Auto are disabled, you must enter a static addressIP for
your phone
To set static IP for your phone:
1.
From the Mode menu, press
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
2.
On the Set static IP menu, enter the static IP address. Use the dial pad and the
soft key to enter characters. Press
Add dot
Business IP Range Administration and Provisioning Guide
Back
DHCP
Cancel
You must be familiar with TCP/IP principles and protocols to
configure static IP settings.
to select Static IP, and then press SELECT.
or
or
to highlight your network type (IPv4
Select
Save
to advance to the next character.
or
ed 2.2
66/247
Advertisement
Table of Contents
