Alcatel Temporis IP150 Administration And Provisioning Manual page 135

Off Hook
system_event.off_hook.action_uri
Incoming Call
system_event.incoming_call.action_
uri
Outgoing Call
system_event.outgoing_call.action_
uri
Business IP Range Administration and Provisioning Guide
Select the paging zone priority
from 1 to 10. Zones with a priority
higher than another zone can
interrupt the lower-priority zone's
active page.
The Off Hook URI is triggered when
the user goes to Dial mode by:
 Lifting the corded handset
of the cradle
 Pressing the SPEAKER or
HEADSET hard key
 Pressing a Line PFK
 Pressing the [New] soft key
during a held call. Note that
the Off Hook URI will NOT
be triggered when calling a
pre-defined number and
going immediately to Dialing
mode—this event triggers
the Outgoing Call URI
instead.
The Incoming Call URI is triggered
for each Incoming Ring event or
Call Waiting event. Using the
Incoming Call URI, it is possible to
display extra information on the
phone for an Incoming Call. For
example, the XML application that
is called when there is an Incoming
Call can do a database lookup and
display information on the caller.
Note that this Action URI will not
be triggered if DND or Call Forward
All is enabled or if Call Waiting is
disabled (i.e., the call is rejected).
The Outgoing Call URI is triggered
each time a SIP INVITE message is
sent (Dialing mode). For example,
after:
 Pressing the Dial
Predial with populated
number
 Using the dial pad to speed
dial a call
 Pressing a Quick Dial PFK

Dialing a Directory number
by going off-hook.
URI
URI
URI
softkey in
ed 2.2 135/247
Blank
Blank
Blank