Alcatel Temporis IP150 Administration And Provisioning Manual page 104

sip_account.x.mwi_ignore_unsolicited
Enable Stutter Dial Tone
sip_account.x.stutter_dial_tone_enabl
e
NAT Traversal Settings
Setting
Enable STUN
sip_account.x.nat_traversal_stun_enable
Server address
sip_account.x.nat_traversal_stun_server_address
Server port
sip_account.x.nat_traversal_stun_server_port
Enable UDP Keep-Alive
sip_account.x.nat_traversal_udp_keep_alive_enable
sip_account.x.nat_traversal_stun_keep_alive_enable
Keep-alive interval (secs)
sip_account.x.nat_traversal_udp_keep_alive_interva
l
sip_account.x.nat_traversal_stun_keep_alive_interv
al
Music On Hold Settings
Setting
Enable Local MoH
sip_account.x.music_on_hold_enabl
e
Business IP Range Administration and Provisioning Guide
supports unsolicited MWI
notifications.
 you want the Message Waiting
LED to indicate new messages
when the deskset receives
unsolicited MWI notifications.
Enables or disables the stutter dial
tone for that line (indicating
message(s) waiting) when the phone
goes off hook.
Description
Enables or disables STUN
mechanism to allow sip
communications in
NATted environments.
Enter the stun server
address or fqdn
Enter the port the STUN
server is using. Normally
it will be 3478
Enables or disables UDP
or STUN keepalive
packets on this account.
Keep-alive packets are
used to maintain
connections established
through NAT
Enter the time in seconds
between UDP ir STUN
keepalive packets.
Description
Enables or disables a local tone
played when the phone is put on
hold by the remote party.
0:
disable
1:
enable
Range
0:
disable
1:
enable
IP
address
or fqdn
0-65535
0:
disable
1:
enable
0-65535
Range Default
0: disable 1
1: enable
ed 2.2 104/247
1
Default
0
blank
3478
0
30