Alcatel Temporis IP150 Administration And Provisioning Manual page 147

Enable PC port
network.pc_port.enable
Enable PC port mirroring
network.pc_port.mirroring.enable
VLAN Settings
You can organize your network and optimize VoIP performance by creating a virtual LAN
for phones and related devices.
Setting
Enable WAN VLAN
network.vlan.wan.enable
VLAN ID
network.vlan.wan.id
Priority
network.vlan.wan.priority
Enable PC Port VLAN
network.vlan.pc.enable
VLAN ID
Business IP Range Administration and Provisioning Guide
Enable or disable the PC port
to operate in hub/switch
mode (depending on the
Enable PC Port Mirroring
setting).
When the PC port is enabled,
select Enable PC Port
Mirroring to set the port to
operate in hub mode
(network traffic on the WAN
port is reflected in the PC
port). When Port Mirroring is
not selected, the port
operates in switch mode.
Description
Enable if the phone is part of a
VLAN on your network. Select to
enable.
Enter the VLAN ID (vlan 5, for
example).
Select the VLAN priority that
matches the Quality of Service
(QoS) settings that you have set
for that VLAN ID. Outbound
packets will be marked and sent
according to their priority.
7 is the highest priority. Note:
Configuring the Quality of Service
(QoS) settings for your router or
switch is a subject outside the
scope of this document.
Enable if the PC connected to your
phone's PC port is part of a VLAN
on your network. Select to enable.
Not applicable to IP100,
IP2015/IP2115 or IP1850
0:disable 1
1:enable
0:disable 0
1:enable
Range Default
0: Disabled 0
1: Enabled
0–4095 0
0–7 0
0:Disabled 0
1: Enabled
0–4095 0
ed 2.2 147/247