Voice Recognition - Mazda CX-5 Manual

Interior Features
Audio Set [Type A (non-touchscreen)]

Voice Recognition

In this section, the basic operation of the
voice recognition is explained.
Activating Voice Recognition
To Activate the Main Menu: Press the
pick-up button or talk button with a short
press.
Ending Voice Recognition
Use one of the following methods:
Press and hold the talk-button.

Press the hang-up button.

Skipping Voice Guidance (for faster
operation)
Press and release the talk-button.
NOTE
®
The Bluetooth Hands-Free system is

operable several seconds after the
ignition is switched to ACC or ON
(requires less than 15 seconds).
When operating the audio unit or the

A/C while using Bluetooth
Hands-Free, the beep sounds or voice
guidance (audio unit)/cannot be heard.
Tutorial
The tutorial explains how to use
®
Bluetooth Hands-Free.
To activate the tutorial, do the following:
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Tutorial"
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
5-58
*Some models.
*
®
Commands useable anytime during
voice recognition
"Help" or "Go Back" are commands
which can be used at anytime during voice
recognition.
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Say: [Beep] "Help"
2. Follow the prompts to receive the
appropriate voice guidance
instructions.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] "Go Back"
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
The voice recognition cannot be

performed while voice guidance or the
beep sound is operating. Wait until
the voice guidance or the beep sound
is finished before saying your
commands.
Dialects or different wording other than

hands-free prompts cannot be
recognised by voice recognition. Speak
in the wording specified by the voice
commands.
It is not necessary to face the

microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
Do not speak too slow or too loud.
