I-Eloop - Mazda CX-5 Manual

The i-ELOOP system suppresses engine load used for generating power and improves
driveability and fuel economy by generating electricity with the kinetic energy that is
generated when the vehicle slows down by applying the brakes or during engine braking.
Stores large amounts of electricity instantly and efficiently uses the electricity for electrical
devices and accessories.
Variable
Voltage
alternator
CAUTION
High-current electricity flows through the following parts, therefore do not touch them.
Variable voltage alternator
DC-DC converter
Capacitor
If the capacitor is to be disposed of, always consult an expert repairer, we recommend an
Authorised Mazda Repairer.
For details, go to the following URL.
http://www.mazda.com/csr/environment/recycling
▼ i-ELOOP Control Status Display
The driver is notified of the i-ELOOP
power generating status and the vehicle
conditions by the control status display.
The i-ELOOP power generating status is
displayed in the centre display.
Refer to Control Status Display on page
4-123.
*

i-ELOOP

Capacitor
▼ i-ELOOP Charging Display
If the engine is started after the vehicle has
not been driven for a long period of time,
an "i-ELOOP charging" message may be
indicated in the display.
Leave the engine idling and wait until the
message disappears.
NOTE
If the vehicle is driven while the message
is displayed, a beep sound is heard.
When Driving
i-ELOOP
DC-DC Converter
4-119
*Some models.